Contact Us

Lean Six Sigma Blog

 Thought provoking articles, industry insights and trends

How is Lean Six Sigma DMAIC Process Defined-Maximum Potential

How is Lean Six Sigma DMAIC Process Defined?

One, if not the most popular processes involved in Lean Six Sigma is none other than the DMAIC, short for (D) – Define; (M) – Measure; (A) – Analyze; (I) – Improve; and (C) – Control. What is this process? How is this process relevant and important in the entire Lean Six Sigma Methodology?

Herewith us in Maximum Potential, we will teach you the basics of what Lean Six Sigma is, which involves discussing the primary methodology that makes up the entire discipline – DMAIC.

What is DMAIC?

DMAIC is short for Define, Measure, Analyze, Improve, and Control; it is a framework or a methodology that focuses on improving or developing a certain business process. It’s a step-by-step procedure that is utilized by many different companies, businesses, and organizations for them to fully see the development needed for their institutions to thrive successfully.


The Define phase is the part of the framework where the problems are identified and seen. It’s also the decision phase where the objectives needed are dictated in accordance with the hurdles and the problems your company or your institution is facing.


The measure is the phase where the current practices are weighed and measured; it’s a part of the DMAIC process because it’s a relevant part of business process improvement. Without measurements or goals, you wouldn’t be able to see your actions being “successful.


The Analyze phase is the third step and it’s dedicated to the data collection, the analysis of the graphs, history of the company, and the like. It is the part where possible solutions are pitched and are thought about.


Following the analysis is the Improve phase and this is where the solutions are tested out to see whether or not they’re working. Furthermore, the improved phase is also part of the DMAIC framework where everything is set out and assessed if they’re good enough.

Once done, the improvised and the developed processes and parts of the business processes are done and adjusted.


Last but definitely not the least is the Control phase – and it’s considered as the most exciting part of Lean Six Sigma or DMAIC. It’s the part where the success is scaled and is seen whether some solutions are applicable to be of use by other processes involved within the business.

So How is Lean Six Sigma DMAIC Process Defined for you? With us here at Maximum Potential, we will do whatever we can, whatever it takes for you to fully understand how Lean Six Sigma works through DMAIC. We will take it as our responsibility for how you will be able to implement and apply all the learning you have acquired.

Goal of DMAIC

Among the many different goals and objectives of other disciplines, the objective of the DMAIC process of Lean Six Sigma is Defined to improve, fully develop, and enhance a specific or a set of business processes. The overall goal of DMAIC is to make sure that a company or a business becomes flexible especially when encountering business problems and hurdles along the way.

Agility and Versatility

Unlike other Lean Six Sigma Consulting and Training companies who only want and focus on how they perform certain tasks, our work in the industry is never leveled or measured by how well we teach or how good we are in educating – our skills and our overall adeptness is seen on how certain measures are applied in the business process.

Maximum Potential’s goal is not to make money or to lure people off of the right path – our goal is to see you, our clients get the most out of Lean Six Sigma; and that is through continuous improvement that the DMAIC framework is offering.

Features of the MaxPT System

Why do clients choose us? Why do they yearn to work with us instead of other companies – even companies that they’ve started with? Simple – through unlimited offers and never-ending improvement and development, we promise all our clients.

In the industry, Maximum Potential has been named and deemed as the most effective, the most flexible, and the most helpful company of all when it comes to solid Lean Six Sigma Training and Consulting. Through the help and the determination of the Lean Six Sigma Coaches, Consultants, Instructors, and Professionals that we have under our employ, you can expect to receive the best and the highest quality of education and training without spending tens of thousands of dollars for it.

Contact us through any of the digital channels we have and never worry about where you can get extensive and world-class quality Lean Six Sigma Consulting Services ever again. Dial us, send us an email, or a quick message and we will attend to your concern as soon as we can.

Work with the best and the most reliable!

Describe Lean Six Sigma Implementation in Manufacturing-Maximum Potential

Describe Lean Six Sigma Implementation in Manufacturing

The manufacturing industry is so vast that it has been the basis of most business process improvement and development procedures. One of which is the strategies and the methodologies of Lean and Six Sigma – but how does the Lean Six Sigma Implementation Affect the Manufacturing of a certain company or business?

How would you describe Lean Six Sigma Implementation in Manufacturing? One of the most common misconceptions that working professionals and executives had is that Lean Six Sigma is actually only for manufacturing and the production industry alone. That’s not true; however, it’s the most effective in this industry because the manufacturing industry has a lot of processes involved.

Lean Six Sigma in Manufacturing

The manufacturing process, or the creation of goods for a client, is a process that is usually produced in mass and in thousands. One good example of manufacturing is the creation of apparel like shirts, underwear, and the like. How would you be able to apply or implement Lean Six Sigma in the industry if it’s controlled and ran by machines and equipment? Well, by optimizing the processes and the functionality of the machines and the equipment.

Can’t seem to wrap your head around how it works? Don’t worry, we here at Maximum Potential will be more than happy to discuss and describe it to you. Through our Lean Six Sigma Consulting and Training Certification, you’ll not only be knowledgeable in Lean Six Sigma, but you will also have the right knowledge, skill, and understanding about how it all works.

Contribution of Lean Six Sigma in the Manufacturing Process

The manufacturing process can simply be defined and regarded to as:

  1. Process of receiving the raw materials
  2. Loading of the materials to the machines
  3. The intervention of experts and professionals
  4. Polishing of the product or the manufactured item
  5. Sending or delivery

Lean Six Sigma, can help each of the following processes be better and more improved through careful data analysis, statistical and graphical analysis and comparison, and many more.

Faster Production

Through Lean Six Sigma, the production or the manufacturing process of companies and manufacturers would be faster – it would take up and consume less and lesser time. Because the focus is to fully improve and enhance the business process, it would surely include the hastening of the processes involved.

Less Waste

The Lean Discipline is what contributes to fewer and less waste in the business process. Waste is not just the single type of waste you’re imagining – business waste is categorized into eight (8) different types and Lean Six Sigma handles any or all of these depending on the requirement of the client. Part of the Lean Six Sigma Training and Certification program that we offer our clients here at Maximum Potential tackles the identification and the reduction of waste in the most efficient and the fastest ways and forms – be sure to get it!

Efficient Production

Efficiency does not always necessarily mean speed – in our vocabulary, it involves everything from the speed, the quality of the work or the produce, and the feedback and the reaction of your clients. Through Lean Six Sigma, everything from the smallest point of detail will be observed and assessed, and it will be improved all in accordance to the development process that has been planned from the very beginning.

In a short conclusion, implementing Lean Six Sigma in the Manufacturing sector is something that can be done to fully enhance and develop a certain business process – or all of the process simultaneously.

More Clients

What happens when you’re able to produce better quality products in a shorter and faster timeframe? Other than the satisfaction of doing it – you get more potential clients! You will never expect that the Lean Six Sigma Implementation in Manufacturing is that easy – you’ll never regret working with us here at Maximum Potential!

The Best Lean Six Sigma Practitioner

Are you trying to look for and locate the best and the most skilled Lean Six Sigma Practitioner in the industry? Do you want to experience the highest and the best quality of Lean Six Sigma Integration and Implementation to your Manufacturing company or business? Work with us here at Maximum Potential!

We are named and deemed as the best and the most reliable Lean Six Sigma Consulting and Training company – and that would never be possible without the help and the assistance of our most dedicated, most talented, and our most skilled Lean Six Sigma Coaches, Trainers, Instructors, and Consultants.

Want to work with the best to experience world-class quality Lean Six Sigma Consulting and Training? Dial us or send us an email! We will respond to your requests as fast as we can – and we can even give you the price or the rate for our consultation or our training that we’re sure you will absolutely fall in love with.

Contact us now!

Describe Lean Six Sigma Implementation in Warehousing-Maximum Potential

Describe Lean Six Sigma Implementation in Warehousing

One of the largest and the most predominantly abundant business industries is warehousing. With all products that can be delivered requiring a place to stay before they get bought, warehousing is truly one of the industries that strive even it today’s modern world. When you look it up, warehousing is defined to be the act of storing goods and products that would be sold, distributed, or be sent to another entity. Think of it like this, if you are engaging in a business where you handle physical products, but only in small amounts, you would store them in your house or some rental place, right? – That’s warehousing.

Similar to any other business or industry, the application or the integration of Lean Six Sigma in Warehousing is a big deal. Because Lean Six Sigma is all about process improvement or development, it would exponentially benefit the processes in warehousing. So how would you Describe Lean Six Sigma Implementation in Warehousing? How can it be helpful for businesses in this particular niche? Don’t worry, Maximum Potential is always ready to explain to you the things you want or need to know – and we’ll also show you some of the best things we can share with you!

The Process of Warehousing

Before we go deep into the realms of Lean Six Sigma in relation to warehousing, are you sure that you fully understand what warehousing is? Here’s a simple and brief guide on how you could look at it.


This is the very first step in warehousing. It is the process of receiving the goods or the products and it needs to be done properly and appropriately. From this step, the responsibility of the goods is now transferred to the warehouse.

Putting Away

Once received, the warehouse would now deliver or transfer it to the warehouse or the storage which is the best option or the most optimal; and it would depend on many things such as the distribution location, the shelf life, and many more.


Once received, the goods or the products would then be stored in the most appropriate storage spaces.


This step is the phase where everything is collected in a warehouse and is ready to be fulfilled through the orders of the customers.


After the orders are finalized, the warehouse will now pack the goods. Everything will be consolidated and it will be in accordance to various factors of delivery and the type of product fulfilled.


The thing that online shoppers love the most – shipping is the end process of warehousing and actually the initial process of delivery to the customer.

Lean Six Sigma Implementation in Warehousing

All of those business processes, if did regularly, might have errors and defects especially since most of them are made and completed by people. Through Lean Six Sigma, those processes can be optimized, improved, and controlled so that the warehouse can eradicate waste, variation, and errors in the given processes.

Herewith us at Maximum Potential, we’ll be able to help you with the Lean Six Sigma Implementation Warehousing that you need. Lean Six Sigma is the problem-solving methodology that has been developed decades ago and is being utilized by many companies and organizations today.

Implementing Lean Six Sigma in Warehousing can yield compounding effects – and the effects are abundant in each of the processes mentioned. Through the many methodologies and processes involved in Lean Six Sigma, it can greatly benefit all warehousing processes individually. From the receiving of the cargo, the package, or the goods, down to the delivery, the processes would be looked at carefully and studied.

Why Work With Us?

Why should you work with Maximum Potential? Why are we the company deemed as the most reliable and the most dependable Lean Six Sigma Consulting and Training company in the industry?

Our expertise and our adeptness have spread throughout the entire industry because of the excellence and the overall skill that we have in consulting and training students. Through our help, the warehousing businesses of our clients went from 0 to 100 without them spending tens of thousands of dollars. With a few observations and implementations of some methods and strategies, they were able to fix up all the issues, resulting in their processes producing lesser and lesser defects and errors.

The goal of Lean Six Sigma is to minimize or eradicate the errors or defects in a certain business process to the extent that the errors or defects should only be at 3.4 per million opportunities. When you work with us, you’ll not only have that kind of thinking, we’ll also teach you how you can apply it to other aspects of your businesses too! With Maximum Potential, you can heighten and expand the capabilities and the processes of your business more than twofold!

How is A3 Related to Lean Six Sigma-Maximum Potential

How is A3 Related to Lean Six Sigma?

Lean Six Sigma is so complex and so big that if you try learning it all at once, it’s going to eat you alive. Luckily for you, there are Lean Six Sigma Training and Consulting companies like us here at Maximum Potential, always ready to help you. But among all the many different types of processes and techniques used, one of the most closely related is the A3 management, and it’s one of the masterpieces of the business industry. What is A3? Is it a specific process? Is it a managerial procedure or process? How is A3 Related to Lean Six Sigma?

Those questions are the questions that are thrown the most whenever we receive inquiries and questions regarding Lean Six Sigma. Before we answer all of those, let’s first discuss what it is.

What is A3 Management?

Contrary to popular belief, the A3 management is the approach that transforms the organization’s management schemes into a learning exercise – and it’s done within the entire organization. Technically speaking, A3 is a template – a structured template used for problem-solving in a continuous and in a growing manner.

Also known as Systematic Problem Solving (SPS), the A3 Management Approach is technically as close as Kaizen, following the PDCA or Plan, Do Check, Act framework.

How is A3 Related to Lean Six Sigma?

You might be confused and now, we’re pretty sure that you’re wondering and confused about all these business process development exercises and practices. They all look and sound similar but if you take a look at it closely, there are some slight differences – and that’s the beauty of business process improvement.

Akin to how Lean Six Sigma works, A3’s goal is to slowly but surely improve and develop an entire organization. Lean Six Sigma is quite different because its principles are focused on the improvement of business processes for the customer experience overall – and it’s moving from one department or division to another. A3, on the other hand, aims to develop an organization as a whole and without putting too much pressure. Its methodological way of being implemented is through some type of learning experience for the professionals and the workers within the company.

Some of the most common uses of A3 Management include:

  • To document the learning of project improvements
  • To be able to moderate and facilitate the comprehension of problems
  • To work at a solution
  • To properly introduce new products and services efficiently

Problem-Solving Similarities

Both A3 and Lean Six Sigma are adjacent to one another because of its process or procedure of problem-solving. Both of them are effective and efficient in order to solve problems specifically within the company – but their ranges are different.

With A3, the process of solving problems would regularly be in the following template:

  1. Background of the Problem
  2. Statement of the Problem
  3. Goal
  4. Root Cause Analysis (RCA)
  5. Adjustment and Improvement
  6. New Target Development
  7. Plan Execution or Implementation
  8. Follow-up and Finalization
  9. Full Implementation
  10. Results Evaluation

Through this 10-step process, companies, businesses, and other organizations are rooting for their businesses to improve on a whole new level of scale. And when you choose us here at Maximum Potential to teach it to you, you will never encounter any type of problem. Whether you want to learn it the long-way, or if you want a brief rundown of it – we’re the company that you can absolutely count on.

A3 and Lean Six Sigma

With the many business processes now being practiced by millions of companies, the disciplines of A3 and Lean Six Sigma still remain unscathed. The two (2) are still deemed as the best and the most useful especially if a company or a corporation is in its dire state of being improved and developed.

So, don’t forget: How is A3 Related to Lean Six Sigma? They complement each other. One can stand alone without the other but having both of them inculcated and integrated in your businesses would be a whole new level of improvement and development.

Wherever you may be, if you need help whether in training or in the consulting of Lean Six Sigma, remember that Maximum Potential is just one call or email away. You will never regret your decision of choosing us – you will be, in fact, be enticed to get more of our services.

Why We’re the Best

No matter how hard you think of it, our services are far from what other companies and Lean Six Sigma Consulting and Training companies offer. Most of them only focus on how they can provide excellent-quality training without putting in enough effort into how clients can apply it to their businesses and current situations.

With Maximum Potential, we assess the learning and the education of our students through the completion of Lean Six Sigma projects.

Work with the best and never worry about how you will get the training or the consulting that you need!

Describe Kaizen and How it Fits Into Lean Six Sigma-Maximum Potential

Describe Kaizen and How it Fits Into Lean Six Sigma

Kaizen is one of the business philosophies that originated from Japan – and it’s a philosophy that focuses on the continuous and the comprehensive improvement or development of working procedures, efficiency, and so on.

In case you’re wondering, the word “Kaizen” is a Japanese term that means “change for the better.” Alternatively, it’s also regarded as the philosophy that relays “continuous improvement,” and it’s why it’s so popular. When you hear it, it might sound something familiar – perhaps, something you have encountered before. But what really is it? How would you Describe Kaizen? How Does it Fit Into Lean Six Sigma?

What is Kaizen?

Similar to the Lean Manufacturing, Kaizen is also discipline from the ever-famous Toyota Company in the 1980s; the company made the methodology famous and they saw Kaizen as how they’ll not run across the same problem again after they’ve solved it.

If we were to take it to form the word itself, Kaizen is a term coming from the two (2) “Kai” and “Zen.” Kai means change, while Zen means good – put them together and you get a term that talks about continuous and constant improvement.

Kaizen is a process control that is taken up from statistics and data that would improve a business’s every aspect. Their approach is on-point and straight on – they don’t wiggle or beat around the bush. Kaizen’s objective is similar to that of Lean Six Sigma – and that is to make sure that the quality or the caliber is as its best. If you want to know more about Kaizen and you want it to come from a company trusted by tens to hundreds of companies, work with us here at Maximum Potential – and we’ll be more than happy to help!

Small But Continuous Improvements

If we were to place Kaizen beside Lean Six Sigma, you’ll be confused because they almost have the same principle and philosophy – and that is to improve and develop the company or the business that they’re working for.

However, the difference is that the main goal or objective of Kaizen is to perform and pursue these changes slowly but surely. Unlike Lean Six Sigma, which tackles issues, no matter big or small, Kaizen’s perspective is that it needs to start small.


Lean Six Sigma has DMAIC or the (D) – Define; (M) – Measure; (A) – Analyze; (I) – Improve; and (C) – Control, while Kaizen has PDCA or (P) – Plan; (D) – Do; (C) – Check; and (A) – Act. The entire goal of Kaizen is this – and it’s pretty straightforward.

Planning is the phase in which the objective needs to be cleared and defined, as well as giving the way or the solution how it’ll be achieved. Do, following plan is the phase of the plan implementation. This is also where changes and modifications need to be made should it be deemed necessary. Checking, is the phase in which the “DO” is going to be evaluated and to see if there are areas for improvement; and last but definitely not the least is the Act, which will be the final step and it’s going to be the adjustments based on the evaluation.

Kaizen and Lean Six Sigma

Lean Six Sigma and Kaizen are relatives – in fact, they share the same stems of ancestors. Kaizen is a very good fit for Lean Six Sigma because just like it, Kaizen’s goal is to improve and enhance the business; in fact, its goal is to develop all aspects of it, just slowly.

How We Help

At Maximum Potential, we will perform and pursue these in a way where you’ll definitely understand it and in a way where you’ll be able to apply or implement it to your work or your industry. Through the experience and the overall skill we have in business process improvement and development, we can be absolutely sure that you’ll be able to benefit from our services. Whether you need help in consulting or in training, we’re the best!

Don’t believe us? Well, here are some of the companies and the organizations we’ve helped:

  • Procter & Gamble (P&G)
  • Abercrombie & Fitch (A&F)
  • The World Bank
  • The United States (US) Air Force
  • Anthem
  • LBrands
  • Graham Local Schools
  • And Many More!

Should you be interested in seeing the full list of clients that we have worked with and that we’re working with right now, we’re just a call away. With the teachings and the training sessions we have for Kaizen and Lean Six Sigma, you’ll never look for anything else. Maximum Potential is the company that can unloose the potential and the hidden skill that your employees and your professionals have, to contribute to the overall welfare of the business. Call us now!  

Experience high-quality and continuous development and improvements for your business through the help and the assistance of our experts and professionals!

What is the American Society for Quality-Maximum Potential

What is the American Society for Quality?

Out of all the many options in business process improvement and development, Lean Six Sigma has been one, if not the most famous, and the most popular methodologies ever created. As a matter of fact, this discipline has accounted for a lot of the success of different businesses in various industries.

But how is Lean Six Sigma Controlled and Calibrated? Who checks for the quality of the teachings and the training sessions of Lean Six Sigma?

The American Society for Quality

Many people would think – that’s such an easy question; it obviously is the American Society for Quality (AQS). But is it them who control Lean Six Sigma?

The most common misconception of it is that they are the bodily organization that controls it when in reality, it’s not them. But What is the American Society for Quality? And do They Control Lean Six Sigma?

Herewith us at Maximum Potential, we will discuss to you who they are; what they’re capable of doing, and how they’re involved in Lean Six Sigma. In addition to that, we will also work to discuss to you whether or not they’re the ones controlling Lean Six Sigma.

What is the American Society for Quality (ASQ)?

As its term suggests, the American Society for Quality (ASQ), formerly the American Society for Quality Control (ASQC) is a community, based globally focused to promote the quality of businesses, workplaces, and other communities.

In shorter and in simpler terms, they’re the organizational body that deals with the enhancement, improvement, and development of business processes in various industries. The initiative is joined by about 80,000 members in over 130 countries and they all have one goal – to ensure that the quality of work, products, and services are at their maximum!

Do They Control Lean Six Sigma?

Although they are globally known as the institution or the movement that promotes healthy and improved business processes, they are not the body that controls Lean Six Sigma. Lean Six Sigma is a methodology that aims toward the improvement and overall development of a company – and in the quality of it, there’s no governing body.

It’s a very common question and the answer to that is a solid NO. The Lean Six Sigma discipline has been made without a body that controls and governs it – and it stays like that. Who controls and checks on it are the Master Black Belts and the Champions in the industry – they’re the highest belt and the most proficient of all the levels.

Because of this fact, Lean Six Sigma programs would really recommend users, students, and learners to have some type of extended learning so that they have an avenue to learn it better and more efficiently.

Who Are We?

So if there’s no governing body, is Maximum Potential considered as an institution that caters to the need of clients when it comes to the guaranteeing of its quality? Certainly! Our company is known as the best and the most trusted Lean Six Sigma Training and Certification and Consulting Company but we’re not, in any way, the body that regulates Lean Six Sigma.

We are known and considered as a trusted and dependable Lean Six Sigma Expert in the fields of training and certification. Meaning, we provide quality training, education, and consulting services to our clients. In fact, here are some of the services that we are capable of offering:

  • Lean Six Sigma Yellow Belt and Green Belt Training and Certification
  • Lead Generation Training and Certification
  • Digital Marketing Training and Certification
  • Lean Six Sigma Black Belt Certification
  • Leadership Excellence Certification
  • And Many More!

Complete and Comprehensive Services

When you work with us, everything you need will be prioritized – everything that comes next is the essential complements to the results you’re looking for. The excellence and the complete adeptness that we have in the industry have painted a better and clearer picture in our clients’ minds that they can count on us with the Lean Six Sigma Quality Education and Training they’re looking for.

Should you be in a position where you think you’ll need the help and the guidance of experts and professionals that have exemplary experience in the industry, never hesitate to work with us or give us a call here at Maximum Potential. You can send us an email, you can utilize our website, or you can contact us – whichever way you prefer, we’ll be more than happy to help you with it.

The ASQ is not the governing body that regulates and moderates the quality of how Lean Six Sigma Training and Certification sessions are held. That gave us room and chances on improving the quality of our services – and we grow every single day being the highest-qualified, the most talented, and the most dedicated company you can ever work with.

How Does Lean Six Sigma Help With Quality Improvement-Maximum Potential

How Does Lean Six Sigma Help With Quality Improvement?

When it’s Lean Six Sigma talked about, there are a lot of people, especially working professionals who think of it as a tool that can help them with their individual needs. Many people find Lean Six Sigma as a way for them to be able to have a better and a more competitive salary, a higher chance at promotions, and even to be relevant and needed in all business industries.

Little do they know that Lean Six Sigma is a problem-solving methodology aimed to help in the improvement of the quality of the products, services, and the business processes of companies, corporations, and organizations. So How Does Lean Six Sigma Help With Quality Improvement? What are the things it has that make it a needed methodology or program by companies and businesses?

Lean Six Sigma Benefits

In learning about Lean Six Sigma, it is imperative for us to know the certain benefits and advantages that it has for businesses and for people. Yes, Lean Six Sigma is a methodology taught to individual people for them to be able to work for the company and develop it. Here are some of the benefits that Lean Six Sigma has:

  • Higher and increased salary and compensation (individual)
  • Better chance at promotion (individual)
  • Assumption of leadership roles in a company (individual)
  • Reduced waste in business processes (organizational)
  • Improved and heightened business quality (organizational)
  • Better customer experience and customer satisfaction (organizational)

From those benefits alone, you already know how Lean Six Sigma Helps with the Quality Improvement of businesses and organizations. And if you are in need of a company that you know you can trust, there is none other than Maximum Potential that can help you with the holistic approach you want to have in your business process improvement.

How it Helps With Quality Development

Through Lean Six Sigma, companies, businesses, and organizations would be able to: have fewer defects, wastes, and errors, produce higher profitability and cash flow, generate better customer satisfaction and experience, and many more!

Quality improvement is integrated and inculcated in business process and quality improvement and development through the principles and the objectives of it which are to:

Improve and Develop Customer Experience

The main goal of Lean Six Sigma – to ensure the quality of customer satisfaction and customer experience. We here at Maximum Potential will absolutely teach you and educate you about the different ways on how you can use Lean Six Sigma to improve and develop your customer experience.

Reduce or Totally Eliminate Waste

Through the Lean Discipline, the business wastes can be expected by companies, businesses, and organizations to be reduced – or even better – eliminated. This waste identification function of this methodology is especially useful in industries and businesses that cater to the needs of their clients through products and services.

Control Processes for Future Improvements

The DMAIC or the (D) – Define; (M) – Measure; (A) – Analyze; (I) – Improve; and (C) – Control framework of the Lean Six Sigma, is the methodology that aims for the quality improvement of services, businesses, and even the products from companies and organizations.

Controlling the flow of how products, services, and business processes are in the strongest selling point of Lean Six Sigma. Imagine it for a second – why would a company yearn for consulting or training of some sort for Lean Six Sigma when after the service, they wouldn’t know what to do?

With us here at Maximum Potential, we leave all our clients with all the needed techniques and strategies they can have for them to handle the business processes and quality improvements and developments on their own.

Our Focus on Application and Integration

As opposed to how other Lean Six Sigma Training and Certification companies do it, we don’t just offer plain courses; what we offer is a Curriculum – a Curriculum that’s deemed the best and the most dependable in the industry and the discipline of Lean Six Sigma.

This program is something that is proctored by and handled by the most talented, the most skillful, and the most experienced coaches, instructors, and trainers in the industry. You wouldn’t worry about the effectiveness and the efficiency of our services because you know it’ll be the bomb. So How Does Lean Six Sigma Help With Quality Improvement, you may ask? It’s a long story but to summarize the answer, it’s all in how the business processes of companies and organizations are.

With us here at Maximum Potential, you will be able to extend and unleash the maximum and the fullest potential of your company, your business, or your employees through the robust and premium framework of our Lean Six Sigma Training and Certification.

Contact us and work with the best without spending a fortune on it! Send us an email or give us a call – we’ll be more than happy to help you with it!

What are the Origins of Lean Six Sigma-Maximum Potential

What are the Origins of Lean Six Sigma?

A lot of people are not aware that Lean Six Sigma is actually not what it is before. This methodology is known to be the combination of two (2) disciplines – Lean Manufacturing and Six Sigma. So What are the Origins of Lean Six Sigma? Where did it actually come from?

Both were coined and discovered to help businesses with problems, but they’re actually entirely different. The Origins of Lean Six Sigma can be traced back to this but before we do so, let us first discuss what each of its parents is.

Lean Manufacturing

All people who have knowledge about the discipline know that Lean is a discipline that has been discovered by Taiichi Ono of Toyota. Its source was from the Toyota Production System (TPS) and it has evolved over the years, transforming to be the overall system that helps manufacturing companies, as well as other businesses too.

In this methodology, the focus is all about the identification of waste – and the reduction of it or the total elimination. It’s used and wanted by companies, businesses, and organizations because of the time saved by people who utilize it.

Six Sigma

Six Sigma, on the other hand, is a discipline or a methodology that has been coined by the Motorola Engineer, Bill Smith. As compared to Lean, Six Sigma’s focus is not only on the identification and the reduction of waste – but the overall improvement and development of a business process.

Origins of Lean Six Sigma

Where Lean Six Sigma has originated from its roots. It actually is an approach that is team and group-based that look towards the goal of reducing waste in a business process, and at the same time, improving and developing it.

Unlike Lean Manufacturing, Lean Six Sigma did not originate from Japan. Its origins can be seen in the United States in the 1980s as a mix or a combination of healthy management procedures and principles.  However, the official publication of Lean Six Sigma was in the year 2002 in the book of Robert Lawrence Jr., and Michael George called Lean Six Sigma: Combining Six Sigma with Lean Speed.

Managers and company leaders in the United States used the “Lean” Manufacturing to come up with a better solution to the problems – and thus, the Origins of Lean Six Sigma. Since then, a lot of companies wanted and needed it for the development and the overall improvement of their business processes.

We here at Maximum Potential have been the most trusted and the most sought after Lean Six Sigma Training and Consulting company in the industry. Armed with veterans and heavily-experienced coaches and instructors, there’s nothing you need to ask for when you work with us.

Understanding the Origins of Lean Six Sigma

With our help, we will let you understand the origins of Lean Six Sigma without you stressing about it. Understanding it is relevant to your knowledge because you will know:

  • How companies were able to use it
  • What benefits and advantages are involved in using it
  • The many aspects of business process improvement and development
  • And the like

Foreseeing the Effects of Lean Six Sigma

One of the things that you’ll love most about our services here at Maximum Potential is the fact that you will be able to project or foresee the effects and the positive reinforcements of Lean Six Sigma to your business or your company. Even if Lean Six Sigma is taught to individual people and working professionals, it’s going to be effective and efficient for the use of companies, corporations, and organizations with the exception that it needs to be integrated and applied properly.

With our team of instructors, coaches, professionals, and our Lean Six Sigma Black Belts, you will never experience any problem working with us. Dial us, send us an email – or shoot us a message! We will be more than happy to help you with your request! Should you be in dire need of a company that you can trust and count on in the field of the Lean Six Sigma discipline, remember that Maximum Potential is just a nudge away.

Versatile and Flexible Services

Our company was able to develop a system, a platform that can accommodate to the need of students and learners who can’t pursue and visit a specific location to attend the Lean Six Sigma training sessions that companies offer.

Through Maximum Potential’s Lean Six Sigma Training and Certification via Zoom, you need not worry about how you can get the training – you can do it while you’re chilling and sitting in the comfort of your own home!

You will never have a negative or a bad experience when you work with us – we are the best and many companies, businesses, and organizations can attest to that! Contact us now!

How to Get a Black Belt in Lean Six Sigma-Maximum Potential

How to Get a Black Belt in Lean Six Sigma?

Akin to Martial Arts, Lean Six Sigma utilizes the belt scheme to weigh and to measure the proficiency and the level of knowledge of a certain individual or professional. From the White Belt, a student or a learner needs to take several courses and programs, and successfully complete projects in order to get or arrive at a better and at more improved belt or proficiency.

Herewith us at Maximum Potential, we offer our clients the complete and comprehensive Lean Six Sigma Training and Certification Program from White Belt – to the Black Belt level! So whether you want to learn How to Get a Black Belt in Lean Six Sigma or if ever you’re wondering how you can make it prosper, this guide is perfect for you!

Before we discuss that, it is imperative for everyone to understand how the process of Lean Six Sigma Certification works – and that’s what we’ll be discussing.

Lean Six Sigma Training and Certification

Basically, getting a Certification or a specific type of Belt requires you to attend training programs, or complete a certain course with an assessment; as well as different projects. This way, you’ll be adept and skilled in performing and in pursuing Lean Six Sigma projects in real-life scenarios.

At Maximum Potential, you can get up to the Black Belt Level of Lean Six Sigma through the program we’ve tailored. In the same playing field, students and learners can also get any type of Belt, from a White Belt, a Yellow Belt, a Green Belt – to a Black Belt, depending on their choice.

How to Get a Black Belt in Lean Six Sigma?

The first thing candidates and interested students and learners need to do and prepare for is training. Once they’re up, they’ll be trained and educated to let them know of the specific sets of skills they need in being a Black Belt. In this level, students and learners would learn many skills such as calculations, option-weighing, identification and correction of a problem, minimization of risk, and so on.

At Maximum Potential, we greatly advise all our students that they should have experience working in the field, solving problems, collecting and interpreting data, and the like so that the Black Belt Certification would come easy and natural to them.

Black Belt Level Training

Unlike the other levels, the Black Belt Level Training would focus on developing managerial and leadership skills and qualities in which they’d need to integrate and implement it to an organization.

In addition to that, one extremely crucial role of Black Belts is to train and help Green Belts with their projects; coach and instruct them, as well as assist them in developing the skills needed for Green Belts to complete and accomplish goals and objectives.

The Best Black Belt Lean Six Sigma Training and Certification

Are you looking for a Lean Six Sigma Training and Certification company that you can trust? Do you need help from experienced and high-quality Coaches, Instructors, and Consultants to help and aid you in your journey of receiving the Black Belt Certification that you’re rooting for?

Here at Maximum Potential, you’ll get everything you need! From the comprehensive and structured training programs and materials we’ve developed, we were able to come up with the best programs and training sessions for our clients.

We’ve made the overall Lean Six Sigma Training and Certification we offer easy-to-understand and relatable so that customers and clients would not have a hard time understanding it. In addition to that, we, at Maximum Potential focus on the integration and the application of the lessons and the features of Lean Six Sigma. There are many other great institutions out there that focus on training and studying, but they lack the application and the integration function – and that’s the one truly needed by students and learners.

Why Work With Us?

Why should you choose us as the institution in your journey in Getting a Black Belt in Lean Six Sigma? What makes us the best in the industry? How come we’re deemed and considered by many companies and businesses as the best?

Maximum Potential not only teaches Lean Six Sigma raw – but we also guarantee our clients with the excellence and the high quality level of training so that they can spread it to their peers.

Expect great and the best results without paying for tens of thousands of dollars – be the solution your company needs! Now – you know the answer to the question of how to get a Black Belt in Lean Six Sigma – and it can be through us here at Maximum Potential, the best and the most trusted Lean Six Sigma Training and Certification company in the industry!

Become one of the companies, corporations, or organizations that achieved their maximum through our relentless skill!

1 2 3 4 6 7
Contact Us